Tubby | DIY Bath Resurfacing, Repair & Cleaning Products

This outstanding French made cleaner is brilliant on all bathroom surfaces. We recommend this cleaner to all of our customers because it is safe to use, eco friendly and even smells great! For best results use once a week in between daily mild washing up liquid cleans.

For use with:

The Tubby Slip-Resist Kit is an excellent safety feature for use in your bath or shower. Almost invisible against white and smooth enough for comfort. Simply clean and dry the suitable area, degrease using the enclosed surface cleaner sachet, and position the self adhesive slip resistant tape for a comfortable and long lasting safety feature. Size: 3 strips - 400x50mm long to create a standing safety area. Perfect for the centre of a shower tray or the shower end of a bath.

Kit Contents:

Use this handy preparation pad on enamel baths, porcelain basins, toilets and ceramic tiles as part of the preparation process before resurfacing. The pad simply attaches to your electric drill to make light work of preparing the surface rapidly and thoroughly. It has been designed to give the surface just the right key so you don't need to worry about being to rough!

Also great for other DIY jobs like paint stripping and rust removal!

For use with:

Used to repair small chips and damage around the round outlet. Applied to a dry surface after cleaning and sanding. Instructions included.

For use with:

High quality fine finishing filler for baths with badly pitted and rough surfaces. Great for roll top and older enamel cast iron baths because of the typical wear and tear associated with those types. The filler is used after cleaning and sanding when the bath is completely dry. Instructions included.

For use with:

A simple sticky tac cloth for removing any loose dust and particles from the surface after surface preparation and immediately prior to resurfacing.

For use with:

A special adhesion promoter and degreaser, excellent for ensuring a sqeeky clean surface prior to resurfacing. Simply applied with a lint free cloth eg. handkerchief. Can be used on all surfaces. Instructions included.

For use with:

Extra roll of 50m long masking tape. Great for careful preparation.

For use with:

A set of spare material bottles for setting aside an amount of Tubby coating when the resurfacing has been completed. If you keep a small amount of the same material as a precaution it might just come in handy if you drop something heavy into the bath and manage to chip it later. Comes with full instructions to effect a quick repair.

For use with:

This 3M filtering face mask can be used while carrying out any renovation work and protects the wearer from dust particles and odours. A good idea if you are sensitive to smell. Also very useful to keep fine dust away if you are sanding or cleaning in the bathroom. Meets the requirements of EN149:2001 category FFP1.

For use with:

New double strength formula, fast acting, non-drip Dichloromethane free all purpose stripper. The green coloured gel is easy to see and apply, gives superior coverage and is slow to evaporate. We recommend Nitromors as in our experience it is the best stripper available for stripping baths, basins and shower trays etc. Call us for free advice.

For use with:

These quality scrappers are made out of hardened steel blades. The pack contains 4 scrappers 50mm, 80mm 100mm and 120mm. The ideal item for applying filler to large areas of your bath, basin and shower tray.

For use with:

Rust Remedy: prevents rust with this simple brush on treatment applied before coating your bath. Kurust converts rust to a sound surface in just 15 minutes. Ideal for small patches of rust around the outlets can be coated over with Tubby material after 3 hours. No primer or undercoat required, simple to apply, no need to rinse off. Kurust converts iron oxide to stable iron complexes. Call us for free advice.

For use with: